SCS-24100-330 KST Power Supply For Ship

Item No.: 02856
Wuhan constant ship electric appliance KST SCS series power supply for ship is widely used on the ships for charge and discharge panel as marine battery charger & battery rectifier.
Description
Description
SCS-24100-330 KST Power Supply For Ship

Panel diagram:

Description of working indication (green): The working indicator light is on when the power supply is working normally.

Description of fault indication (red): The fault indicator light is on when the power supply has a fault or starts. After the removal of output

fault or the completion of startup, the fault light is off and the working indicator light is on.

Directions:

Users must clearly see the model of the power supply and know the input voltage grade of the power supply before use.

Users should connect input and output in strict accordance with wiring instructions.

Users should pay attention to the positive and negative polarities of the load and then switch on the power after connecting wires according to the wiring diagram and checking Please do not open the case after switching on the power. There is high pressure inside the case. Be careful.

The power supply is equipped with output over voltage, overload, short circuit protection, overheat protection and output under voltage alarm.Alarm signal is outputted when the power supply is protected.

The power supply automatically restores to work normally after the removal of output fault.

The power supply adopts the method of air cooling. The fan is controlled by current in order to extend its service life. The greater the output

current 15, tne Taster the rotational speed of the fan will be.

Specifications:

Model SCS- SCS-2420- SCS-2430- SCS-2440- SCS-2460- SCS-2480- SCS-24100- SCS-24200-
Input Input rated
voltage
(±15%)
(220)single-phase 220Vac
(230) three-phase 220Vac
(330)three-phase 330Vac
(430)three-phase 440Vac
Input frequency range 45~65Hz
Maximum input current 220 6A 220 8.5A 220 9A 220 20A 220 23A 220 25A 220 38A
230 230 230 230 230 230 230
330 <3A 330 <4.2A 330 <5A 330 <9A 330 <11A 330 <13A 330 <26A
430 430 430 430 430 430 430
Efficiency 85%
Out put Output rated voltage 28.2Vdc
Output voltage adjusment range 20~30Vdc
Output current adjusment range 2~20A 3~30A 4~40A 6~60A 8~80A 10~100A 20~200A
Maximun output current 20±1A 30±1A 40±1A 60±1A 80±1A 100±1A 200±1A
Stabilized voltage precision ±1%
Output ripple and noise VPP≤500mv
Ptotection Output overvoltage protection 30±1Vdc
Output undervoltage alarm 21±1Vdc
Overheat protection 85±5℃(Temperature inside the machine)
Output short circuit protection The device is free from damage after short circuit and antomatically
recovers after the removal of short circuit
Function Output Alarm port The relay completes contact action when input poer supply is normal and the device works
The relay resets in the case of device fault(maximum contact voltage and current 32V 1A)
Enviroment Operating temperature 0℃~+55℃
Storage temperature -10℃~+70℃
Relative temperature ≤95% of salt mist, oil mist and mold
Heat emission method Air Cooling
Atmospheric pressure 86kPa~106kPa
Safety
Regulation
Dielectric strength Input single-phase and three-phase 220Vac Input three-phase and three-phase 220Vac
Input to output: 1500Vac/10mA/1 min Input to output: 2500Vac/10mA/1 min
Input to the ground: 1500Vac/10mA/1 min Input to the ground: 1500Vac/10mA/1 min
Output to the ground: 500Vac/10mA/1 min Output to the ground: 500Vac/10mA/1 min
Insulation resistance ≥10MΩ
Other Overall dimnensions 310*190*90mm 410*260*110mm 530*280*230mm
Installation dimensions 295*160mm 385*234mm 510*200mm
Weight 5Kg 8Kg 25Kg

 

Send your message to us
ver_code