WBS Pump Room Temp Montoring And Alarm Device

Item No.: 02674
WBS Pump Room Temp Montoring And Alarm Device has the functions of temp. monitoring, display, alarm and control etc, It is mainly used to monitor and alarm the working temp. of pump room equipments for all kinds of cargo carriers.
Description
Description
WBS Pump Room Temp Montoring  And Alarm Device
This device has been specially designed, manufactured in conformity with 2000 SOLAS Amendment, Chap. ll -2, Reg.4 amended for protecting the cargo pump room. It has the functions of temp. monitoring, display, alarm and control etc, It is mainly used to monitor and alarm the working temp. of pump room equipments for all kinds of cargo carriers.

Application:
This device is used for continuous monitoring of the temperature values on the bulkhead shaft glands, bearings and pump casings of cargo pumps, ballast pumps and stripping pumps,installed in the cargo pump room and driven by shaft passing through pump room bulkheads.

Features:
Intrinsically safe design is applicable to all dangerous area.
Individual adjustable high temp, Alarm for each measuring points.
Available for any number of measuring points.
Most advanced electric technology for high reliability and durability
Simple construction.

Specification:

Power supply: AC 220V 50Hz (main)  DC 24V (Standby)
Number of measuring point: 8 or 16
Temperature accuracy: ± 0.5% F.S
Temperature display range:0~200℃
Temp. transmitter: Pt100, 3 wire
Ex. mark: Ex ia lI CT6
Protection: IP22 ( Contol Box) IP66 (Transmitter)
Function: Temp.Value Display
Audible & visible over temp. alarm
Buzzer stop, Flicker stop, Dimming
Lamp test and fail alarm
AC/DC auto-switchover and power fail alarm
Tem.Alamm control module

AYK-03T Temp Display and Alarm Module

Mode: AYK-03T (8 alarm control module)
Input: 8x Pt100,3 Wire
Lock delay time: 0~99 seconds (adjustable)
Channel outputs: 8 switch signals output
Alarm output: contact output, NO or NC, AC 220V 2A
Accept horn: by means of push button on the front, or externally
Accept flash: by means of push button on the front, or externally
Function test: by pushing both accept and flash push buttons during at least 2 sec.
Other function: dimming/fail alarm
Supply voltage: 24V DC
Accuracy:+0.5%FS
Send your message to us
ver_code