NAT-200 AIS Tester Used To Detect Various AIS DSC Equipment

Detect various AIS equipment, including AIS navigation aids, Class A AIS, Class B AIS, AIS-SART, etc.
Take into account AIS testing and DSC testing

Based on IMO's 1252 circular on AIS annual inspection, NAT-200 is a special tester for annual inspection of AIS equipment.

Performance characteristics

 - Used to detect various AIS equipment, including AIS navigation aids, Class A AIS, Class B AIS, AIS-SART, etc.

 - Take into account AIS testing and DSC testing.

 - Frequency test accuracy up to ±99Hz (AIS device frequency allowed range ±1000Hz).

 - Built-in storage of up to 10 test data.

 - Provide dedicated software (compatible with WINDOWS XP and 7) for testing data processing and generation of various reports.

 - Easy to carry and use, ordinary dry battery can support 5 hours of testing.

Test content

- Test AIS frequencies (AIS1 and AIS2);

- test and estimate the transmit power of each channel of the AIS;

- test the transmission slot number;

- receiving and parsing AIS message content;

- send data to the AIS device;

- Conduct a DSC 70 channel reconnaissance test;

- check the response status of the AIS equipment to the virtual ship;

- Simulate NMEA data transmission;

- Analyze data such as AIS static information, dynamic information, and navigation mark information;

- transmitting and receiving various DSC signals;

- detecting AIS-SART transmission information;

- Receive data from the pilot interface or an external sensor.